An Experimental Study of Filmwise Condensation on Horizontal Enhanced Condenser Tubing
Author | : Huseyin Ciftci |
Publisher | : |
Total Pages | : 170 |
Release | : 1979 |
ISBN-10 | : OCLC:227440201 |
ISBN-13 | : |
Rating | : 4/5 (01 Downloads) |
Book excerpt: Heat transfer and hydrodynamic performance of eight different geometrically enhanced tubes of different metals was determined. Results were compared to a 25.4 mm (1.0 in.) OD, smooth stainless steel tube. Steam at about 21 kPa (3 psia) was condensed on the outside surface of each enhanced tube, horizontally mounted in the center of a dummy tube Bank. Each tube was cooled on the inside by water. The overall heat transfer coefficient was determined directly from experimental data. The inside and outside heat transfer coefficients were determined using the Wilson plot technique. The cooling water pressure drop was measured inside the tube and converted to the friction factor in the enhanced section. The overall heat transfer coefficients of the enhanced tubes were increased as much as 1.9 times, and the corrected pressure drops of the enhanced tubes were as large as 4 times the corresponding smooth tube value for the same cooling water velocity. The helix angle should be 45 deg to 60 deg on the inside surface and 90 deg on the outside surface of the tube to obtain maximum inside and outside heat transfer coefficients. (Author).